SmallHD 1303 HDR | Full HD 13-inch LCD Monitor with 1500 NITs Brightness

Clarity that produces certainty

The display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don't have the time or proper measurements, a razor-sharp, low latency display will help you hit your marks.

Calibrated for collaboration

Preview what you're sending downstream using the Output Preview Page, while utilizing software features like customizable focus assist and peaking on your 1303 monitor. If it's the only monitor near by, its colour accuracy (100% REC 709) and broad viewing angle make it easy to share with clients and directors.

Can you see me now? Good

With a panel roughly 3x brighter than most production monitors, the 1303 is not restrained by ambient light. Its optically bonded LCD combats glare and sunlight, allowing you to pull focus in less than ideal shooting environments.

Proper power options

Power options for the 1303 monitor are simple and convenient. The 2-pin power out allows for a seamless integration with accessories such as the Teradek Bolt wireless receiver.

Travel made easy: carry-on accessories

All SmallHD® production monitors are equipped with the Rapid Rail Mounting System; the simplest way to connect, store, and travel with critical monitor accessories.

Smooth is fast

Transitioning from table to C-Stand happens safely and securely with the 1303's VESA compatible mounting accessory.

Boldly go

The 1303 monitor is the perfect blend of functionality and portability. With a razor-sharp display and a rugged build quality, the 1303 will boldly go where no other production monitor has ever gone before.

Blackmagic Design

• URSA Mini Pro G2

Firmware Update 1.4 for SmallHD Production Monitors

Features Added

• RGB Offsets have been added to the appearance menu for custom color adjustment.
• Added support for RED’s new IPP2 workflow: Input color space list now includes REDWideGamut/LOG3G10 (also removed the deprecated LOG3G12 gamma).

Improvements

• Color space options in the menu are renamed for clarity. The name now indicates both the expected gamma and gamut.
• Adjustable Studio Brightness range has been increased.

Bug Fixes

• Fixed a bug causing some 17” monitor’s screens to go black during a user upgrade.
• Fixed a bug with the waveform’s spot meter.

Firmware Update 1.3 for SmallHD Production Monitors

Features Added:

• De-Interlacer is now supported in all SmallHD production monitors.
• The 1303HDR now supports Studio Mode, our 100 nit mode for studio environments
• V-Log and S-Log 3 DeLOG and HDR Preview support now available
• A “Color Picker” tool has been added to the toolbar. This allows you to display video color values of a selected pixel.

Improvements

• Multi-view has been simplified to Dual-View.
• Repeatedly pressing the input button will now cycle through all available inputs.

Bug Fixes

• Fixed a bug that occasionally caused Vectorscope to crash.
• Fixed a bug causing transient data to not display properly when “no correction” is set in the Input menu, even if a log format is not the chosen gamma.
• Fixed a bug causing the Multi-view/Dual-view to occasionally show valid inputs as a black image.
• Fixed a bug that occasionally caused some colors to be rendered incorrectly when the input format changes
• Toggling “ignore look” on a scope while there is no active look on the current page will no longer result in a change to the scope data.
• Fixed a bug that sometimes caused a page to continue displaying Brightness & Contrast adjustments made within the “Focus Assist” & “Peaking” tools, even after these tools were disabled.

Firmware Update 1.0 for SmallHD Production Monitors

Features Added:

• Enhanced Input Menu:
  • Each input type (HDMI, SDI1, SDI2) can be configured to support different incoming gamma formats.
• HDR Preview Setting (HDR Models Only)
  • Enable with any SmallHD supported log format (HDR models only)
  • Histogram added to help users judge incoming data & make gamma decisions
  • List of recognized input color spaces:
    • HDR Monitors Only
      • BT 2020/2084/2100: Uses a 2020 gamut and the 2084 PQ EOTF
      • HLG
    • All Production Monitor Models
      • REC 709 (with various gamma options)
      • SLOG
      • SLOG2
      • CLOG
      • LOGC
      • RedLogFilm
  • Improved log correction from the above formats
• New “Appearance” menu which provides controls for the following
  • The Appearance menu is not affected by the “disable calibration” button on the calibration page
    • Sharpness: Increase or decrease the edge contrast of the image
    • Contrast-Increase or decrease the separation between dark and bright levels of the image
    • Brightness: Adjusts the black levels of the monitor
    • Gamma Shift: Adjust image gamma curve with a new slider.
    • RGB Gain: Used to adjust the red, blue, and green balance in the image.
    • OLED Gamma Match: Changes monitor gamma to resemble an OLED display
    • The Appearance menu is not affected by the “disable calibration” button on the calibration page
• Added Backlight Settings
  • Studio Brightness: 100 nit studio mode for true Rec.709 representation on all* production monitors
    • Excludes the 1703HDR
  • Standard Range: Factory calibrated range of brightnesses
  • Max Brightness: Uncalibrated maximum brightness
• USB Support Added
  • USB ports are now activated, and can be used to power accessories – Outputs 5v through each port 1.5amp shared (total)”
  • USB flash drives may be used to load/save LUTs, Profiles, and Image Overlays
• Crop Tool Added
  • Allows user to crop a region of the image and then blow that up to the full video area.
• Image Flip Added
  • Flip the on-screen video signal and menu both horizontal and vertically
    • Horizontal
    • Vertical
    • Horizontal + Vertical
    • Menu Flip
    • Auto Flip
• Multi View Page Enhancement
  • You can now select Dual input view or Quad input view for your multiview page. This is configurable in the monitor’s settings menu.
• Enhanced Focus Tools
  • Focus Assist and Focus Peaking tools now contain a Contrast & Brightness value which can be modified for each page. This will make your focus assist even easier to read when contrast is turned up and brightness is turned down.
  • Peak Thresh option has been added to Focus Assist tool, this allows you to have increased control in your Focus Assist
• Image Scale tool name has changed to Image Location

Download the latest Firmware and Software

• Ultimate HD Displays Brochure
• Download HiRes Images

• 1 x 1303 HDR
• 1 x 36" HDMI Cable (CBL-SGL-HDMI-HDMI-36)
• 1 x Mains Power Cord