Wireless Transmission

Teradek COLR | Real-time wireless LUT box with camera control

Teradek

COLR

Real-time wireless LUT box with camera control

Product Code: TER100070

Suggested Retail Price €TBA+VAT

Where to buy

Have a question about this product or want to request a demo?

Contact Our Technical Team

Kit List

View your Kit List
News Shooter: Teradek's COLR: Ryan Kunkleman gives a Hollywood DIT's opinion by Elliot Smith
Review:
News Shooter: Teradek's COLR: Ryan Kunkleman gives a Hollywood DIT's opinion
Its given me more control and more flexibility. Other than the wireless CDL (Color Decision List) capabilities the fact that I can control camera settings wirelessly is amazing. When my Red camera footage comes to me it is already graded for dailies, no saving CDLs and applying them in software-based grading suites. Obviously small adjustments are made to make sure the footage all matches but the broad strokes are already there.
Its also allowed me to get rid of a lot of cables. There are sets where I have to run two or three cables from my cart back to camera or the AC or a Director's monitor, with the Colr I can park a box on the camera and daisychain monitors together saving a lot of time and headachesReview by Elliot Smith
Goto review
  • Real-time LUT box
  • HDMI/SDI cross-converter
  • Camera control bridge
  • Integrates with Pomfort LiveGrade Pro
  • Feature-rich iOS UI for configuration and control
  • Simple WebUI for network configuration
  • OLED LCD Display with joystick navigation buttons
  • On/Off switch
  • Powered USB 2.0 host port
  • CDL/1024 1D LUT (supports 10-bit colour)
  • 33x33x33 3D LUT (supports 10-bit colour)
  • Custom OSD tools
  • Built in Video Scaler, Deinterlacer, frame rate converter
  • Save and Load screen images
  • Test Pattern Generator for Calibration
  • Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP (TBD), SSL
  • 2 Pin Power input
  • Nominal Power Consumption: 5W - 8W
  • Auxiliary Power Input: 6-28V DC
  • Dimensions: 2"x1"x4" (WxDxH)
  • Weight: 6oz

COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.

Looks Mean Everything

During camera prep, on your cart, through colour timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 33 point 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button.

Works with Pomfort LiveGrade

COLR integrates with Pomfort LiveGrade Pro, giving you fine control of your looks over Wi-Fi, Ethernet, or via USB. Looks can be saved directly to COLR, and LiveGrade supports multiple simultaneous devices.

Universal Support

COLR supports just about every camera signal on the market -- from GoPro to ALEXA. RAW or LOG signals can be converted for monitoring, and every camera's look can be synced to show directors their vision while shooting. COLR also enables wireless camera control for Ethernet-enabled cameras, including FoolControl for RED digital cinema cameras and ARRI packages.

No Monitor Left Behind

Whether your production requires industry standard colour and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. Versatility is no longer a luxury with COLR’s built-in signal converter and simultaneous HDMI and SDI outputs.

Connected Set

With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final colour grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.

Teradek BIT-773
BIT-773

COLR Mounting Bracket
[TER110773]

SRP: €89+VAT
Teradek BIT-036
BIT-036

2 x Replacement Straight Wireless Antenna for COLR
[TER110036]

SRP: €20+VAT
The Disconnected DIT: safe production on or off-set

Whether you’re in front of the camera or behind the camera, the show must go on, as they say. It’s up to all of us to collaborate in a way that makes sense and keep creating content that matters.Sabrina Safran Backstage Magazine

Published: 4 years ago

COLR v1.2.10

New Features

  • Added Alexa Mini/SXT CAP forwarding support

Changes

  • None

So Bug Fixes

  • None

COLR v1.2.6 Release Notes

New Features

  • None

Changes

  • None

Bug Fixes

  • Front panel LUT settings were not applied correctly

COLR v1.2.5 Release Notes

New Features

  • Added support for COLR-Duo

Changes

  • Added OMOD default LUTs -- reset LUTs after update to load them
  • Improve Look upload handling to prevent running out of device storage

Bug Fixes

  • Firmware progress was not shown if web UI was accessed using Bonjour advertisement on Safari
  • Panasonic Varicam control was not started correctly
  • Combined 1D/3D LUT .cube files could not be processed

COLR Firmware Version 1.1.1

New Features

  • Added Configurable password to COLR's web interface
  • Added Varicam LiveGrade passthrough support for Camera Link
  • Added option to apply Look when creating and saving a preset

Changes

  • USB device interface IP address is now configurable

Bug Fixes

  • Video output could fail to re-initialize after video input was removed and reconnected
  • Some API calls did not behave as documented

Download the latest Firmware and Software

  • 1 x Power Supply Unit 2pin Power to 18 w AC Adapter
  • 2 x Antennas Straight Wifi 5.8 GHz
  • 1 x Mini-USB to USB cable
Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.

Cookie Settings