Networking Adapters

Sonnet Solo 10G - Thunderbolt 2 Edition | 10GBASE-T Thunderbolt 2 to 10 Gigabit Ethernet Adapter with NBASE-T Support

Sonnet

Solo 10G - Thunderbolt 2 Edition

10GBASE-T Thunderbolt 2 to 10 Gigabit Ethernet Adapter with NBASE-T Support

Product Code:

Product Discontinued

Replaced by

Sonnet Solo 10G
Solo 10G

10GBASE-T 10Gb Ethernet Thunderbolt 3 Adapter

  • Adds 10GBASE-T (Copper) 10GbE Connectivity - Adds an RJ45 10 Gigabit Ethernet port to your computer with Thunderbolt 2 ports.
  • Cost-Effective - Low-cost adapter connects to 10GbE infrastructure via inexpensive Cat 6 or Cat 6A cables at distances up to 55 or 100 meters, respectively.
  • 20Gbps Thunderbolt 2 Interface - Connects to any Thunderbolt 2 computer port, or at the end of a Thunderbolt 2 device daisy chain.
  • Supports NBASE-T (Multi-Gigabit) Standard - 5 Gb/s and 2.5 Gb/s speeds supported over inexpensive Cat 5e (or better) cabling at distances up to 100 meters when used with a multi-Gigabit switch or router.
  • Advanced Features - Audio Video Bridging (IEEE 802.1Qav, AVB) and Energy-Efficient Ethernet (IEEE 802.3az) supported.
  • Easy Setup - Configure the adapter's settings using operating system tools.
  • Small and Silent - Adapter is pocketable and uses no fan, perfect for use in noise-sensitive environments.
  • Bus-Powered, Energy Efficient - Powered through its Thunderbolt connection, the Solo10G requires no power adapter.
  • Rugged Construction - Aluminum enclosure withstands heavy use.

Mac Compatibility

  • Mac with Thunderbolt 2 ports
  • macOS 10.13.6+
  • macOS Catalina compatible

Windows Compatibility(1)

  • PC with a Thunderbolt 2 port
  • Windows 10 (64-bit Edition Version 1809 or greater)

Linux Compatibility

  • Linux computer with a Thunderbolt 2 port
  • Linux Kernel 5.0+

Technical Notes

  1. Windows computers require the latest BIOS and Thunderbolt drivers to support this product. Check with your computer manufacturer for update information.
  2. Driver download and installation required for use with Windows.
  3. Switch/router must support AVB to support this feature.
  4. 2.5/5G speeds are supported when used with NBASE-T compatible (multi-Gigabit) switches.
  5. Thunderbolt and Thunderbolt 2 ports have less power than Thunderbolt 3 ports for bus-powered devices. In order to fit within the reduced power envelope, the Solo10G (Thunderbolt 2 Edition) needs to operate at a reduced performance compared to the Solo10G (Thunderbolt 3 Edition). If you require the maximum 10Gb performance on a Thunderbolt or Thunderbolt 2 computer, we recommend the Sonnet Twin10G (Thunderbolt 2 Edition), which is not bus-powered.

Super-fast 10GBASE-T Connectivity Now at a Breakthrough Price for Thunderbolt 2

Video content creation and output has moved on from 1080p HD to 4K and beyond, ushering in 10 Gigabit Ethernet (10GbE) as the new networking standard for post-production shared storage workgroups and other bandwidth-intensive workflows. On the infrastructure side, low-priced 10GbE switches with RJ45 (copper) have cut the cost of set up, resulting in very rapid adoption. The problem is, most computers aren’t equipped to get you connected. For computers with a Thunderbolt™ 2 port, there is now an equally affordable 10GbE adapter—Sonnet’s Solo10G™ (Thunderbolt 2 Edition), a powerfully simple solution for adding 10GBASE-T 10GbE network connectivity to Mac® and Windows®(1) or Linux® computers with Thunderbolt 2 ports.

Connect to 10GbE Infrastructure

Equipped with a single RJ45 socket, the Solo10G adapter connects to 10GbE infrastructure via inexpensive Cat 6 or Cat 6A copper cabling at distances up to 55 or 100 meters, respectively. Oh, and it’s the lowest-priced Thunderbolt 2 10GbE adapter available.

Pocketable. Bus-Powered. Silent.

The Solo10G is pocketable—measuring just 3.1 inches wide by 4.5 inches deep by 1.1 inches tall—and bus-powered to enable truly portable use without a power adapter. Wrapping the latest technologies in a rugged aluminum case, Sonnet designed a cool-running adapter that doesn’t need a fan, allowing silent and energy-efficient operation.

Simple Setup

Connect the Solo10G adapter to your computer, and the adapter to the network switch or directly to 10GbE-enabled storage, and then configure the adapter’s settings through the macOS Network control panel, Windows Device Manager(2), or Linux command line (or graphical utility). How’s that for simple?

Advanced Features, Intelligent Operation

The Solo10G (Thunderbolt 2 Edition) adapter attains its high throughput performance and low host-CPU utilization through functions such as flow control, 64-bit address support for systems using more than 4GB of physical memory; and stateless offloads such as TCP, UDP and IPv4 checksum offloading. These processes enable your computer to perform better while large files transfers or high I/O operations take place. This Sonnet adapter supports Energy-Efficient Ethernet (IEEE 802.3az), which reduces the adapter’s power demands on your computer.

AVB Support

Audio Video Bridging (IEEE 802.1Qav, AVB) support makes the adapter perfect for use in pro audio and video applications where synchronization of data streams is critical.(3)

NBASE-T Support for Faster Transfers Across Existing Cabling

If your facility has Cat 5e wiring installed already, you can still get a great performance gain—from 250 to 500 percent over Gigabit Ethernet speed—without rewiring! The Solo10G adapter supports the NBASE-T™ industry-standard of 2.5/5 Gb link speeds, which enables greater than Gigabit Ethernet speeds over Cat 5e (or better) cabling when used with an NBASE-T compatible (multi-Gigabit) switch or router. Now you can deploy the same adapter across your organization for users supported by different Ethernet cabling infrastructures.

20Gbps Thunderbolt 2 Interface

Solo10G (Thunderbolt 2 Edition) features a 20Gbps Thunderbolt 2 Interface that connects to any Thunderbolt 2 computer port, or at the end of a Thunderbolt 2 device daisy chain.

Replaceable Captive Cable

‍‍Equipped with a captive cable, the Solo10G adapter’s Thunderbolt connector remains firmly connected to it at all times without it being soldered in place. Should the cable ever break, it can easily be replaced with an approved replacement cable available from Sonnet or a Sonnet-authorized reseller.

Secure First

‍‍The Solo10G (Thunderbolt 2 Edition) adapter was engineered with security features essential to today’s users. Incorporating encryption in hardware, the Sonnet network adapter is protected against malicious firmware modification which could enable covert computer access—instead, any unauthorized attempt to modify the firmware renders the adapter inoperable. These security features prevent the Solo10G adapter from being reprogrammed, except by a manufacturer’s update using a secure encryption key.

Sonnet Solo 10G
Solo 10G

10GBASE-T 10Gb Ethernet Thunderbolt 3 Adapter

  • Solo10G Thunderbolt 2 Edition
    10GBASE-T/NBASE-T Ethernet Thunderbolt 2 Adapter with captive 0.5-meter Thunderbolt 2 cable
  • Documentation
Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.